Use a bathtub drain stopper to seal the drain and stop water from draining down it. It might frequently become caught, making it challenging to turn the faucet on and off. A deeper understanding of the problem’s underlying causes will become apparent if you choose to remove the drain stopper at this time. Additionally, it’s crucial to know how to remove your drain stopper in case it wasn’t placed exactly as it should be. If your stopper does not entirely cover the tub’s bottom when it is in place, it may not effectively keep the water in, making bath time difficult.
The first step in learning how to remove a drain stopper is to decide which kind you’ll use to address your issue. You may read about the most common bathtub drain stoppers in the article below.
There is a push-pull rod on the side of this kind of stopper. This rod has a finger hole at one end and a spherical handle that extends from one end. To stop the water flow, a plunger attached to the push-pull mechanism descended down the drain. How to remove a push-pull tub stopper is as follows:
- From the stopper’s top, remove the knob. Handily remove the knob and stopper. Wiggle the knob until it releases with one hand.
- Can you not use your hands to unscrew the knob? To free it, carefully wrap a cloth around it with normal pliers.
- Find the exact location where the strainer’s crossbar and stopper link after it has been disconnected. A standard flathead screwdriver can be used to remove the pot from the strainer.
Tub Stopper with Toe-Touch
The drain can be opened by pulling up on toe-touch tub stoppers, which have pliers-like shapes. The stopper in your bathtub closes both drains as you push it down, releasing the handle. A toe-touch tub stopper can be removed in what way?
- One end of the plunger rod that protrudes from beneath the rubber top can be turned with a screwdriver or a pair of tongs. With the aid of your tools, pry this rod up until it is released from its resting place.
- Once the plunger has been taken out, pull up on the rubber top to take it out of the base. You should now be able to release your strainer by turning the head counterclockwise with your hands.
- Pull the head up and away from the stopper after it has been unscrewed to remove it.
- Grip the knob that is attached to this style of stopper on the top of the bathtub drain with your hands. Pull up slowly until the stopper frees itself from the base.
Tub Stopper with Lift and Turn
It is fastened with two screws if you have a raise and turn tub stopper. How is this style of bathtub drain stopper removed?
- One hand should be placed on top of the body when the stopper is set to “open” in order to secure it.
- After removing the strainer’s stopper, slowly turn the knob in the other way while feeling around for a screw that may be seated on the knob. If you are unable to locate one, turn the stopper counterclockwise to release it from the strainer until you can remove it.
- On rare occasions, the threads are lost, rendering the object hard to remove. Try slowly turning it upward and pulling it up.
- If your stopper doesn’t have a screw directly on the knob but won’t unscrew, lift it up and turn it around until you find a little screw.
- To remove the screw, use a screwdriver or a wrench. Don’t totally remove the screws in order to unfasten the stopper. This method requires extreme caution since, if the screw is fully removed, it could easily fall inside the drain.
- If neither the stopper nor the knob has set screws, the mechanism most likely uses a channel/pin design.
- By slowly rotating the stopper in the opposite way while removing it from the channel, you can align the bottom slot with the top part’s pin.
- To release it, wiggle the stopper upward.
Various Tub Stoppers
One screw secures a flip-it® tub stopper to the overflow plate’s base. Typically, this kind of tub stopper is easy to remove. Grab the stopper by the body and twist it in all directions, starting with up and down, until it comes loose.
After the procedure is finished, what should you do?
Once you’ve managed to get the bathtub drain stopper off, use a flashlight to peer down the drain. If your bathtub drains slowly, there may be a deposit of hair, soap scum, and other material that has blocked the drain permanently. If you’re courageous enough, you could attempt to remove the strainer and manually unstick the obstruction if it isn’t too deep. Although you may let BJC Plumbers Jersey City handle your bathtub repair instead of dealing with all the unpleasant mess.
Contact Our Team Immediately
Let us handle the task for you if you’re trying to remove a bathtub drain stopper. Call us at (201) 885-7265 to speak with our staff right away. You may rely on our team of professionals to aid you and restore your bathtub with no problem.